Results 1 to 10 of 32

Thread: Cone Repair on 602B & 604B

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Hostboard Member slial's Avatar
    Join Date
    February 16th, 2013
    Location
    Rhode Island
    Posts
    24
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Cone Repair on 602B & 604B

    Quote Originally Posted by Cal Weldon View Post
    Hi Scott,

    Make the patch slightly larger than the 'wound.'
    Yes, align all pieces best you can before starting.
    If they lined up perfect and this wasn't in the surround area, I would recommend clear nail polish as you wouldn't even need a patch.
    This repair will last indefinitely if:
    1. you prep the area well
    2. you do a good job with the patch

    If you do a lousy job and it falls off, then so what, you start again and do it properly this time, no biggie.

    Just go to any electronics repair shop, tell them what you are doing and they might just give you a speaker to try it out on. Try and get one with the same style cone/surround.

    Nice to hear bowtie's story.
    Cal,

    If you look at the photo you can see the tear is in the cone area but the original issue was in the surround. So would I use the nail polish as a glue to adhere the seam of the tear and then cover the whole spot with nail polish? This would likely require holding it in place until it sets too.
    Last edited by slial; March 13th, 2013 at 05:22 PM.

  2. #2
    Senior Hostboard Member Cal Weldon's Avatar
    Join Date
    January 17th, 2004
    Location
    British Columbia
    Posts
    648
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Cone Repair on 602B & 604B

    That's tough to see in the pics so here's what I suggest and you'll have to take it from there.

    If you are doing repairs in the surround then use the rubber cement method. If you are clear of the surround and are working only on the cone and have good alignment of the damaged area, use the clear nail polish straight up, no thinner, no tissue. You still do the repairs on both sides of the cone.
    Nothing like a great big pair of speakers to make your day.
    [url]http://s286.photobucket.com/albums/ll111/calweldon/?start=all[/url]
    [url]www.calweldonconsulting.ca[/url]

  3. #3
    Junior Hostboard Member slial's Avatar
    Join Date
    February 16th, 2013
    Location
    Rhode Island
    Posts
    24
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Cone Repair on 602B & 604B

    Any specifics or preferences for nail polish?

    Also, do you have any photos of repairs you have done? This might help me visualize the desired outcome.

  4. #4
    Senior Hostboard Member Cal Weldon's Avatar
    Join Date
    January 17th, 2004
    Location
    British Columbia
    Posts
    648
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Cone Repair on 602B & 604B

    Quote Originally Posted by slial View Post
    Any specifics or preferences for nail polish?

    Also, do you have any photos of repairs you have done? This might help me visualize the desired outcome.
    Although I consider myself a modern day sensitive man I don't have a clue as to the nail polish. Here's how I acquire it: "Honey can I borrow some clear nail polish? I don't need much. Thanks Honey, I love you."

    Photos? No. Just try it, you'll find you are an expert after just once, trust me, it's not hard. Just pretend they are you're children and you'll do fine. I like the idea of trying it on a spare driver first though.
    Nothing like a great big pair of speakers to make your day.
    [url]http://s286.photobucket.com/albums/ll111/calweldon/?start=all[/url]
    [url]www.calweldonconsulting.ca[/url]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 24479663 times.